Mechanical Adjustment Of The Bypass Tray Section - Konica Minolta bizhub C250 Service Manual

Hide thumbs Also See for bizhub C250:

Table of Contents

Field Service Ver. 3.0 Aug. 2006

14.3 Mechanical adjustment of the bypass tray section

Adjustment of the Bypass Paper Size Unit

This adjustment must be made in the following case:

• The Bypass Paper Size Unit has been removed.

1. Install the gear so that the protrusion

of the gear [1] and the mark [3] on

the Bypass Guide Rack Gear [2] are

aligned in a straight line.

4038F3C003DA

2. Install the Bypass Unit Cover so that

part A (edge) [2] of the Rack Gear [1]

for the Bypass Paper Size Unit and

part B [3] of the Bypass Unit Cover

are aligned in a straight line.

4038F3C004DB

14. Mechanical adjustment

Table of Contents