Procedure For Resetting; Trouble Resetting; Contents To Be Cleared By Reset Function - Konica Minolta bizhub C250 Service Manual

13. Procedure for Resetting

13. Procedure for Resetting

13.1 Trouble resetting

Functions • If the all troubles occur and the status would not be cleared by turning Main Power
Switch OFF and ON again, or opening and closing the front door, clear the status of
the machine.
Use • To be used when the status would not be cleared by turning Main Power Switch OFF
and ON again, or opening and closing the front door in case of a trouble.
Setting/ 1. Turn OFF the Main Power Switch.
Procedure 2. Turn Main Power Switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the Main Power Switch, turn it on again more than 10 seconds after
and check if the machine starts correctly.

13.2 Contents to be cleared by Reset function

1 Items for clearing
Contents to be cleared
Jam display
Rank A
Malfunction
display
Rank B
Rank C
Erratic operation / display
Utility Mode
(Except items on Expert
adjustment.)
Service Mode (System 1/2)
Counter Setting
Billing Setting
Management
Function Choice
Adjustment of the touch panel
position
: Will be cleared (initialized)
-: Will not be cleared
*1: Items to be cleared
Marketing Area (Fax Target Only)
Foolscap Size Setting
Install Date
System 1
Tel/Fax Number
No Sleep
Original Size Detection
HDD
System 2
Image Controller Setting
386
Main power
Front Door
Open/Close

Fusing

Optical







Field Service Ver. 3.0 Aug. 2006
Trouble
switch
resetting
Off/On
Error Clear
 




 
 
 
 
 
Initialization
System
Data Clear

 
 
 


*1


