Administrator Setting; System Setting - Konica Minolta bizhub C250 Service Manual

8. Utility Mode
8.6

Administrator Setting

• The Administrator setting will be available by entering the administrator password (8 dig-
its) set by the administrator setting or Service Mode.
(The administrator password is initially set to "12345678.")
NOTE
1
• When the following setting is set to "ON", entering the incorrect Administrator
Password three times will cause access lock. When an access lock occurred, turn
the Main power OFF, and wait for 10 seconds or more and turn power ON again to
enter the Password again.
[Administrator Setting] → [Security Setting] → [Enhanced Security Mode]
8.6.1

System Setting

A. Power Save
(1) Low Power Mode Setting
Functions • To set the time until Low Power starts operating after the last key operation has been
completed.
• Low Power: To turn LED and LCD OFF, and lower the power consumption.
Use • To change the time until Low Power starts.
Setting/ • Use the 10-Key Pad for setting.
Procedure • The default setting is 15 min.
(2) Sleep Mode Setting
Functions • To set the time until Sleep Mode starts operating after the last key operation has
been completed.
• Turn all lines OFF except 5 V line for Control.
• "OFF" will only be displayed when "No Sleep" in Service Mode is set.
Use • To change the time until the Sleep Mode starts.
NOTE
• The sleep mode will begin in 48 hours even if it sets it to "OFF."
Setting/ • Use the 10-Key Pad for setting.
Procedure • The default setting is 30 min.
(3) Power Save Key
Functions • To set the type of the Power Save Mode which starts by pressing the Power Save
Key.
Use • To change the Power Save function which starts by pressing the Power Save key.
Setting/ • The default setting is Low Power.
Procedure
202
"15 min." (10 to 240)
"30 min." (15 to 240) / OFF
"Low Power"
Field Service Ver. 3.0 Aug. 2006
Sleep