6. Service / Test Mode
6.
Service / Test Mode
• The Service / Test Modes are set from the Service Mode screen of the main unit.
6.1
Service Mode setting procedure
1. Press the [Utility/Counter] key.
2. Touch the [Details] Check key.
3. Press the keys, [STOP] → [0] → [0] → [STOP] → [0] → [1], in this order.
4. Enter the service code (8 digits).
5. Select [ADF].
NOTE
• Do not teach this procedure to others unless it is absolutely necessary.
6.2
Type of the Service Mode
• The [ADF] in the Service Mode has 7 items as follows.
• Original Stop Position (Adjust)
• Auto Stop Position Adjustment (Adjust)
• Sensor Check (Test)
• Sensor Auto Adjust (Adjust)
14
Field Service Ver. 1.0 Jul. 2005
• Registration Loop Adj. (Adjust)
• Paper Passage (Test)
• Original Tray Width (Adjust)
4582F3E513DA