Forwarding Access Setting - Konica Minolta bizhub C250 Service Manual

10. Service Mode
D. Connection Setting
Functions • To set the Port No. and the time for Timeout when accessing the FTP Server, and
also to set whether or not to enable PASV Mode.
Use • To use when accessing the FTP Server.
• To use when connecting by the PASV (passive) Mode (FTP Server side will inform
the connection port before connecting).
Setting/ <Port Number>
Procedure • Enter the value between 1 and 65535 using the 10-key pad.
<Connection Time Out>
• Enter the value between 1 and 60 (min.) using the 10-key pad.
<PASV Mode>
• The default setting is OFF.
10.17.4

Forwarding Access Setting

A. User ID
Functions
• To register the User ID for accessing the Program Server where Firmware is to be
stored.
Use
Setting/ 1. Select [User ID].
Procedure 2. Enter the User ID (up to 64 one-byte characters) on the on-screen keyboard.
B. Password
Functions
• To register the Password for accessing the Program Server where Firmware is to be
stored.
Use
Setting/ 1. Select [Password].
Procedure 2. Enter the Password (up to 64 characters) on the on-screen keyboard.
C. URL
Functions
• To register the Address and Directory of the Program Server where the Firmware is
to be stored in URL.
Use
Setting/ 1. Select [URL].
Procedure 2. Enter the URL (up to 256 one-byte characters) on the on-screen keyboard.
NOTE
• Enter the URL which format suits the Protocol to be used.
When connecting to http http:// (Host name or IP Address)/ Directory name or
https:// (Host name or IP Address)/Directory name.
When connecting to ftp ftp:// (Host name or IP Address) / Directory name.
D. FileName
Functions
• To register the file name of the Firmware data to be downloaded.
Use
Setting/ 1. Select [FileName].
Procedure 2. Enter the File Name (up to 63 one-byte characters) on the on-screen keyboard.
372
ON
Field Service Ver. 3.0 Aug. 2006
"OFF"