Konica Minolta bizhub C250 Service Manual page 827

3. Other
3.4.7 Intake cover
[1]
[2]
3.4.8 Tray unit front cover/Tray unit rear cover/Connector cover
[5]
[8]
[4]
[8]
1. Remove two screws [1] and remove the tray unit front cover [2].
2. Remove two screws [3] and remove the tray unit rear cover [4].
3. Remove the screw [5] and remove the connector cover [6].
NOTE
• When installing the tray unit front cover, snap the tab [7] first.
• When installing the tray unit back cover, snap the tab [8] first.
16
[4]
[3]
9J08F2C551DA
[3]
[6]
Field Service Ver. 1.0 Aug. 2006
1. Remove the finisher unit.
See P.21
2. Remove the finisher unit rear cover.
See P.13
3. Remove the finisher unit upper
cover.
See P.14
4. Remove the C-ring [1].
5. Remove the screw [2] and the metal
bracket [3], and the intake cover [4].
[7]
[1]
[2]
[1]
[7]
[3]
9J08F2C520DA