Konica Minolta bizhub C250 Service Manual page 294

Field Service Ver. 3.0 Aug. 2006
<Meter Count Notification>
1
• It will not be displayed when [E-Mail TX Setting] is set to "Restrict".
Functions • To set whether or not to inform the total counter by E-Mail.
Use • To use when not informing the total counter by E-Mail.
Setting/ • The default setting is Allow.
Procedure
<SMTP Server Address>
Functions • To set the SMTP server address.
Use • To enter the SMTP server address.
Setting/ • SMP Server Address Version 4 format
Procedure [0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
1. Touch [Host Address].
2. Select [IP Address Input], and enter IP Address.
3. Select [Host Name Input], and enter the host name.
<Binary Division>
Functions • To set whether to carry out Binary division for data to be transmitted
Use • Not to carry out Binary division for data to be transmitted
Setting/ • The default setting is ON.
Procedure
<Divided Mail Size>
Functions • To set the dividing size when carrying out the Binary division for data to be transmit-
ted.
Use • To change the dividing size of the data.
Setting/ 1. Press the Clear key.
Procedure 2. Enter the dividing mail size between 100 and 15000 (in 100 increments) using the
10-Key Pad.
<Connection Timeout>
Functions • To set the Timeout period for connection in transmitting e-mail to SMTP server.
Use • To change the timeout period for connection in transmitting e-mail to SMTP server.
Setting/ • Select the timeout period using [+] / [-] keys.
Procedure • The default setting is 60 sec.
<Server Capacity>
Functions • To set the Max. capacity per mail which SMTP server can receive.
Use • To change the Max. capacity per mail which SMTP server can receive.
Setting/ • The default setting is No Limit.
Procedure
"Allow"
"ON"
"60 sec." (30 to 300, in 30 sec. increments)
"No Limit" (1 to 100)
8. Utility Mode
Restrict
OFF
251