Konica Minolta bizhub C250 Service Manual page 326

Field Service Ver. 3.0 Aug. 2006
(5) Secure Document Access Method
1
Functions • To display the status of the Authentication system on the control panel for the Confi-
dential document access.
Use • It cannot be changed at the operator's option since it will automatically be set accord-
ing to the [Prohibit Functions When Auth. Error] setting.
• It will be set to [Mode 1] when [Prohibit Functions When Auth. Error] is set to [Mode
1].
It will be set to [Mode 2] when [Prohibit Functions when Auth. Error] is set to [Mode
2].
Mode 1 : This mode is for Authentication by Confidential document ID and Pass-
Mode 2 : This mode is for Authentication by Confidential document ID. It displays
Setting/ • The default setting is Mode 1.
Procedure
(6) Restrict Fax TX
1
Use • To set whether or not to prohibit sending FAX.
Setting/
• To prohibit sending FAX.
Procedure
Use • The default setting is OFF.
E. Enhanced Security Mode
1
Use • To set whether or not to enhance security.
Setting/ • To use when enhancing the security function at user's option.
Procedure • The following settings are necessary for setting the Security Enhancement "ON".
Administrator Password
User Authentication
HDD Lock Password or Encryption word
SSL Certificate
Image Controller Setting
CE Password
CE Authentication
CS Remote Care
Management Function Choice
Use • The default setting is OFF.
word. It displays the list of the corresponding Confidential document to
print them.
the list of the corresponding Confidential document, and print them with
Authentication by Password.
"Mode 1"
ON
: Change it with the one which meets Password Rules.
: Set to "User Authentication (MFP)" or "User Authenti-
cation (External Server)".
: Set the HDD Lock Password or Encryption word with
20 characters. (Encryption word can be set only when
SC-503 is mounted.)
: Register Self-Certificate for SSL communication.
: Set to [Controller 0].
: Change it with the one which meets Password Rules.
: Set to [ON].
: Conduct RAM Clear, and cancel the setting.
: Set to "Unset".
ON
8. Utility Mode
Mode 2
"OFF"
"OFF"
283