8. Utility Mode
8.6.4
User Authentication/Account Track
• It will not be displayed when the following setting is not set to [Unset].
1
[Service Mode] → [Billing Setting] → [Management Function Choice]
A. General Settings
(1) User Authentication
Functions
• To set the User Authentication method.
1
Use
• To select whether to authenticate the user by the External Server or MFP.
Setting/
• The default setting is OFF.
Procedure
NOTE
• [OFF] cannot be selected when the following setting is set to "ON".
[Administrator Setting] → [Security Setting] → [Enhanced Security Mode]
• Select the type of Authentication server when "On (External Server)" is selected.
• Select the Authentication Server type, and conduct setting for each server type.
• The default setting is "Active Directory"
"Active Directory"
NOTE
• [NTLM v1] and [NTLM v2] will not be displayed when the following setting is
set to "OFF".
[Administrator Setting] → [Network Setting] → [SMB Setting] → [User Authen-
tication (NTLM)]
• [NDS] will not be displayed when the following setting is set to "OFF".
[Administrator Setting] → [Network Setting] → [NetWare Setting] → [User
Authentication Setting]
(2) Public User Access
Functions
• To set whether to allow or prohibit the nonregistered user to use the system when
User authentication has been set.
Use
Setting/
• The default setting is Restrict.
Procedure
NOTE
• This setting is not available without User Authentication.
• [Allow] cannot be selected when the following setting is set to "ON".
1
[Administrator Setting] → [Security Setting] → [Enhanced Security Mode]
• [Allow] cannot be selected when Synchronize User Authentication & Account
Track] is set to "Do Not Synchronize".
(3) Account Track
Functions
• To set whether to enable the Account Track function or not.
Use
• To enable the Account Track function.
Setting/
• The default setting is OFF.
Procedure
232
"OFF"
ON (External Server)
NDS
"Restrict"
"OFF"
Field Service Ver. 3.0 Aug. 2006
ON (MFP)
NTLM v1
NTLM v2
Allow
ON