Field Service Ver. 3.0 Aug. 2006
[7]
[5]
[8]
3.5.5
Replacing the Tray 2 Separation Roller
[2]
[4]
[3]
OK
4. Snap off the C-clip [5], and remove
5. To reinstall, reverse the order of
6. Select [Service Mode] → [Counter]
NOTE
[6]
• Replace the Bypass Tray Feed
4038F2C502DA
1. Slide out the Tray 2.
2. Open the Vertical transport door.
3. Remove two Claws [1], and remove
[1]
4038F2C011DA
4. Remove two Screws [3], and remove
NOTE
• Make sure the position of the Mylar
[3]
NG
4038F2C012DB
3. Periodical check
the spring [6] and the guide plate [7].
Remove the Bypass Paper Separa-
tion Roller Assy [8].
removal.
→ [Life] and clear the count of
[Manual Tray].
Roller and the Bypass Separation
Roller Assy at the same time.
the Vertical transport door [2].
the Jam processing cover [4].
when installing the Jam processing
cover.
21