Replacing The Tray 2 Pick-Up Roller - Konica Minolta bizhub C250 Service Manual

Field Service Ver. 3.0 Aug. 2006
[17]
[20]
[18]
[22]
3.5.7

Replacing the Tray 2 Pick-up Roller

10. Remove the C-ring [15] and Bushing
[16], and remove the Shaft Assy [17].
[16]
[15]
4038F2C512DA
11. Remove two E-rings [18] and Bush-
ing [19], and remove the Tray 2 Pick-
up Roller fixing plate Assy [20].
[18]
[19]
4038F2C513DA
12. Remove the C-ring [21] and Tray 2
[21]
Feed Roller [22].
13. Select [Service Mode] → [Counter]
→ [Life] and clear the count of [2nd.].
4036fs2596c0
1. Remove the Tray 2 Separation Roller
installation plate Assy.
See the procedures 1 to 5 in "Tray 2 Sep-
aration Roller."
See P.21
2. Remove the Tray 2 Right Rear
Cover.
See P.90
[1]
3. Disconnect the Connector [1].
4038F2C014DA
3. Periodical check
25