Service Call Counter - Konica Minolta bizhub C250 Service Manual

10. Service Mode
10.10.3 Jam
Functions • To check the number of misfeeds that have occurred at different locations in the
machine.
• To clear the count of each counter.
Use • To check the number of paper misfeeds that have occurred
Setting/ • To clear the count of a counter, select the specific part and press the Clear key.
Procedure • If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing
operation.
10.10.4

Service Call Counter

Functions • To check the number of malfunctions that have occurred at different locations in the
machine
• To clear the count of each counter.
Use • To check the number of malfunctions that have occurred
Setting/ • To clear the count of a counter, select the specific part and press the Clear key.
Procedure • If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing
operation.
10.10.5 Warning
Functions • To check the number of warning conditions detected according to the warming type
• To clear the count of each counter.
Use • To check the number of warning conditions that have been detected
Setting/ • To clear the count of a counter, select the specific part and press the Clear key.
Procedure • If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing
operation.
• When a warning condition occurs, an oil mark appears at the lower left corner of the
Basic screen.
• Touching the oil mark will display the warning code screen.
10.10.6 Maintenance
Functions • To set a count value for maintenance of any given part.
Use • When any given part is replaced.
Setting/ Maint.-Set
Procedure • Enter the maintenance counter value from the 10-Key Pad.
Maint.-Count
• Counts up when a sheet of paper is fed through the machine.
• Pressing the Clear key will clear the count.
• If the count is cleared mistakenly, press the Interrupt key, which will undo the clearing
operation.
346
Field Service Ver. 3.0 Aug. 2006