Replacing The Bypass Tray Feed Roller - Konica Minolta bizhub C250 Service Manual

3. Periodical check
[4]
[7]
[5]
3.5.3

Replacing the Bypass Tray Feed Roller

[2]
18
3. Take off the rubber stopper [3], shaft
[4], spring [5], and guide plate [6] to
remove the Paper Separation Roller
[6]
fixing bracket Assy [7].
[3]
4038F2C003DB
4. Snap off the E-ring [8] and the Tray 1
[9]
Paper Separation Roller Assy [9].
5. To reinstall, reverse the order of
removal.
[8]
6. Select [Service Mode] → [Counter]
→ [Life] and clear the count of [1st.].
NOTE
• Replace the Tray 1 Feed Roller and
4037F2C509DA
Tray 1 Separation Roller at the
same time.
1. Remove the Multi Bypass Unit.
See P.113
2. Snap off the E-ring [1], and remove
Bypass Paper Feed Clutch [2].
[1]
4038F2C004DA
Field Service Ver. 3.0 Aug. 2006