Konica Minolta bizhub C250 Service Manual page 974

Field Service Ver. 1.0 Jul. 2005
[5]
2.3.15 Exit Roller (Lower) and Paper Exit Belt
[3]
[2]
[4]
[5]
[7]
[4]
4583fs2557c0
[6]
4583fs2558c0
[1]
4583fs2559c0
[4]
4583fs2560c0
[6]
[8]
4583fs2561c0
5. Push up the Safety Guide [4] from
the bottom to release it from the
shaft [5] and remove it.
6. Remove the Paddle [6].
7. Remove the other Paddles as well in
the same way.
1. Remove the Tray Section.
See P.13
2. Slide the Aligning Plate (Front) [2]
and the Aligning Plate (Rear) [3] out-
side to remove them from the Tray
[1].
3. Remove two Holders [4], and remove
the Finisher Tray Stopper [5].
4. Remove the screw [6], and remove
the Paper Guide (Front) [8] while dis-
engaging two claws [7].
2. Other
15