Konica Minolta bizhub C250 Service Manual page 972

Field Service Ver. 1.0 Jul. 2005
2.3.12 Paddle Section
[2]
[2]
[4]
[5]
2.3.13 Exit Roller (Upper)
[3]
[1]
4583fs2548c0
[3]
[4]
4583fs2549c0
[6]
4583fs2550c0
[1]
4583fs2551c0
[2]
4583fs2552c0
1. Remove the Finisher Tray.
See P.12
2. Place the Finisher Tray [1] as shown
in the figure.
NOTE
• Be careful not to damage the Align-
ing Plate [2].
3. Remove the Belt [3], and remove two
screws [4].
4. Separate the section into the Tray
Section[5] and the Paddle Section
[6].
1. Remove the Paddle Section.
See P.13
2. Place the Paddle Section [1] as
shown in the figure.
3. Turn the gear [2] in the direction indi-
cated by an arrow to move up the
Exit Roller (Upper) section [3].
2. Other
13