Administrator Feature Level; Ce Authentication; Iu Life Stop Setting - Konica Minolta bizhub C250 Service Manual

11. Enhanced Security
11.3.3

Administrator Feature Level

Functions • To set which Modes to be allowed for the Administrator to use in Service Mode.
Use • Use when allowing the Administrator to use some Modes in Service Mode.
• The Modes allowed for the Administrator to use in each setting are as follows.
[System Setting] →
[Expert Setting]
[Standard Size
Setting]
Setting/ • The default setting is Prohibit.
Procedure
11.3.4

CE Authentication

• It will not be displayed when the following settings are set to "ON".
[Administrator Setting]
Rules].
Functions • To determine whether or not to authenticate CE Password as entering Service Mode.
Use • Use when authenticating CE Password as entering Service Mode.
NOTE
• For setting the following setting to "ON", set the CE Authentication to "ON"
1
and change the initial CE Password beforehand.
[Administrator Setting] → [Security Setting] → [Enhanced Security Mode] or
[Password Rules]
Setting/ • The default setting is OFF.
Procedure
11.3.5

IU Life Stop Setting

Functions • To select whether or not to stop a print cycle when the IU reaches its service life
Use • Use to select not to stop the print cycle when the IU reaches its service life.
Setting/ The default setting is Stop.
Procedure
376
Administrator Setting Function
Printer
Erase Leading Edge
Adjustment
Leading Edge Adjustment
Centering
Scanner
Adjustment
Horizontal Adjustment
Vertical Adjustment
Centering
Original Stop Position
ADF Adjust-
ment
Centering Auto Adjustment
Auto Adj. of Stop Position
Original Glass Original Size Detect
Foolscap Size Setting
Level1 Level2
→ →
[Security Setting]
ON
"Stop"
Field Service Ver. 3.0 Aug. 2006
"Prohibit"
[Enhanced Security Mode] or [Password
"OFF"
No Stop
Level 1 Level 2










