Tray 2 Feed Roller/Tray 2 Pick-Up Roller - Konica Minolta bizhub C250 Service Manual

6. Other
6.4.7

Tray 2 Feed Roller/Tray 2 Pick-up Roller

[2]
[4]
[3]
OK
[5]
156
1. Slide out the Tray 2.
2. Open the Vertical transport door.
3. Remove two Claws [1], and remove
[1]
4038F2C011DA
4. Remove two Screws [3], and remove
NOTE
• Make sure the position of the Mylar
[3]
NG
4038F2C012DB
5. Remove two Screws [5] and the Tray
[6]
4038F2C013DA
Field Service Ver. 3.0 Aug. 2006
the Vertical transport door [2].
the Jam processing cover [4].
when installing the Jam processing
cover.
2 Separation Roller installation plate
Assy [6].