Konica Minolta bizhub C250 Service Manual page 242

Field Service Ver. 3.0 Aug. 2006
C. PCL Setting
(1) Font Setting
1
Functions • To set the font when not specified by the printer driver during PC printing.
Use • To use when the printer driver cannot specify the font during printing from Windows
DOS, etc.
• It can be selected from the Internal font (Internal) or the Download font (Disk or Soft).
Setting/ • The default setting is Courier.
Procedure
1. When selecting from the Internal font, touch [Internal], and select the one from the
displayed font list.
2. When using the Download font, select [Disk] or [Soft], and select the font using the
font #.
(2) Symbol Set
Functions • To set the Font Symbol Set when not specified by the printer driver during PC print-
ing.
Use • To use when the Font Symbol Set cannot be specified by the printer driver during
printing from Windows DOS, etc.
Setting/
• The default setting is Roman-8 or PC8, Code Page 437.
Procedure
(3) Font Size
Functions • To set the font size when not specified by the printer driver during PC printing.
Use • To set the font size when it cannot be specified by the printer driver during printing
from Windows DOS, etc.
• To set Scalable Font (: Point) and Bitmap Font (: Pitch) respectively.
Setting/ • The default setting is
Procedure Scalable Font : 12.00 points
Bitmap Font
(4) Line/Page
Functions • To set the number of lines per page for printing the text data.
Use • To change the number of lines per page for printing the text data.
Setting/ • Default setting value differs depending on the values by the following two different
1
Procedure settings.
[Utility] → [User Setting] → [Printer Setting] → [Basic Setting] → [Original Direction]
[Utility] → [User Setting] → [Printer Setting] → [Paper Setting] → [Default Paper Size]
: 10.00 pitch
"60 or 64 lines" (5 to 128)
8. Utility Mode
199