Konica Minolta bizhub C250 Service Manual page 921

4. Other
Precaution for clincher reinstallation
• When the clincher is installed, the position of the stapler and the clincher will be
misaligned. Be sure to perform the following adjustment.
[1]
[2]
[1]
[2]
[1]
14
1. Use three screws [1] to temporary fix
4511F2C550DA
2. Loosen the screw [1] of the stopper.
3. Loosen three screws [2] of the
[2]
4511F2C551DA
4. Aligning the protrusions of the jig [2]
NOTE
• Make sure that the protrusions of
[1]
4511F2C552DA
5. Turn the gear [1] of the clincher and
[3]
[2]
4511F2C553DA
Field Service Ver. 1.0 Aug. 2006
the clincher [2].
clincher.
with the recesses in the stapler [1], fit
the jig to the stapler.
the jig properly rest in the recesses.
then slide the clincher assy so that
the protrusion of the clincher [3] fits
into the recess in the jig [2].