Left Cover (Bizhub C252) - Konica Minolta bizhub C250 Service Manual

Field Service Ver. 3.0 Aug. 2006
6.3.8

Left cover (bizhub C252)

2
[2]
[1]
[3]
[1]
[2]
1. If the optional finisher FS-514 is
mounted, remove it.
See FS-514 Service Manual.
See P.18
NOTE
• After removing the finisher FS-514,
remove four screws [1] and mount-
ing plate [2].
• When reinstalling the mounting
plate, do not secure two lower
[1]
screws too tight, and make sure
that the plate and the main unit will
be parallel and the clearance [3]
between those two will be even.
9J06F2C656DA
2. Open the front door.
3. Remove the three screws [1], and
remove the left cover [2].
9J06F2C657DA
6. Other
85