Replacing The Tray 1 Feed Roller - Konica Minolta bizhub 200 Service Manual

3. Periodical check
3.5.3

Replacing the Tray 1 Feed Roller

[2]
[3]
[5]
[4]
[6]
[7]
[11]
[9]
20
[1]
4040F2C508DA
4040F2C509DA
[8]
4040F2C510DA
[10]
[9]
4040F2C512DA
Confidential – for internal use only, do not distribute
Field Service Ver. 2.5 Jul. 2006
1. Remove the screw [1] and, holding
the stopper [2], remove Tray 1 [3].
2. Remove two screws [4] and the Con-
nector Cover [5].
3. Remove the Connector [6].
4. Remove two screws [7] and the Tray
1 Feed Roller Assy [8].
5. Remove four screws [9] and the Tray
1 Feed Roller Assy Cover [10] and
the Tray 1 Separator Roll Assy [11].