Utility Mode; Touch Panel Adjustment - Konica Minolta bizhub C250 Service Manual

Hide thumbs Also See for bizhub C250:

Table of Contents

8. Utility Mode

Utility Mode

• To adjust the position of the Touch Panel display

• Make this adjustment if the Touch Panel is slow to respond to a pressing action.

• Use during the setup procedure.

1. Press the Accessibility key.

2. Touch [Touch Panel Adj.].

3. Using the tip of a pen or similar object, touch the four crosses (+) on the screen in

• These crosses may be touched in any order; but be sure to touch the center of each

• Use care not to damage the screen surface with the tip of the pen.

4. Touching all four crosses will turn the Start key ON in green.

5. Press the Start key.

Field Service Ver. 3.0 Aug. 2006

4037F3E512DA

Table of Contents