Image Controller Setting; Option Board Status; Consumable Life Reminder - Konica Minolta bizhub C250 Service Manual

Field Service Ver. 3.0 Aug. 2006
10.9.2

Image Controller Setting

Functions • To set the type of the controller.
• [Peripheral Mode] appears when [Others] is selected.
Use • When setting up the controller.
Setting/ Image Controller Setting
Procedure • Select the controller to be used.
"Controller 0"
Controller 1
Controller 2
Controller 3
Others
Peripheral Mode
• Select the operating mode of the Scanner.
Mode 1: Not use
Mode 2: Not use
Mode 3: Not use
NOTE
• After changing setting, make sure to turn off the Main Power Switch and turn it
on again more than 10 seconds after.
10.9.3

Option Board Status

Functions • To set when the Optional Fax Mount Kit, Local Interface Kit is mounted.
Use • Use when setting up the Optional Fax Mount Kit, Local Interface Kit is mounted.
Setting/ • Setting modes are Fax (Main), Fax (Sub), local I/F and JPEG.
Procedure • The default settings are "Unset."
Fax (Main)
Fax (Sub)
local I/F
JPEG
NOTE
• When the setting has been changed, turn off the Main Power Switch and turn it
on again more than 10 seconds after.
10.9.4

Consumable Life Reminder

Functions • To select whether or not to give the display of PM parts lifetime
PM parts lifetime display: An entire screen warning is given when the service life
• Applicable units:
Transfer Belt Unit, Fusing Unit, Imaging Unit (C, M, Y, K)
Use • Use to select not to give the display of PM parts lifetime.
Setting/ • The default setting is "Yes."
Procedure
: The standard controller is used.
: An external controller is used.
: An external controller is used.
: An external controller is used.
: An external controller is used.
: Set "Unset"
: Set "Unset"
: Set "Unset"
: Set "Unset"
of a specific unit has been reached, prompting the
user to replace the part.
"Yes"
10. Service Mode
No
339