Konica Minolta bizhub C250 Service Manual page 80

Field Service Ver. 3.0 Aug. 2006
[1]
[3]
[2]
4038F2C533DA
4038F2C534DA
[4]
4038F2C535DA
3. Periodical check
B. Reinstallation Procedure
1. Remove the Imaging Unit from its
plastic bag.
2. Peel off the Tape [1] so that the
Mounting Bracket [2] can be
removed.
Then, remove the Mounting Bracket
[2].
NOTE
• Since the Imaging Unit is highly
susceptible to light, keep it
shielded from light up to the time it
is installed.
• Carefully unseal the plastic bag
(black).
• If the Imaging Unit is packed in the
plastic bag (black) again, seal the
package using tape or another
means.
3. Tilt the Imaging Unit [3] to the left
and shake it a small stroke in the tilt
direction twice. Then, tilt it to the
right and shake it a small stroke in
the tilt direction twice.
4. Remove the Caps [4] on the end of
the Imaging Unit and the bottom
packing material.
37