Konica Minolta bizhub C250 Service Manual page 824

Field Service Ver. 1.0 Aug. 2006
3.4 Disassembly/Assembly procedure
3.4.1 Finisher unit right front cover
[1]
3.4.2 Finisher unit left front cover
[1]
[2]
3.4.3 Finisher unit rear cover
[1]
[2]
[1]
[3]
[2]
4511F2C562DA
9J08F2C503DA
[3]
4511F2C560DA
1. Open the front door.
2. Remove two screws [1] and remove
the finisher unit right front cover [2].
NOTE
• At reinstallation, first fit the tab [3]
into position.
1. Remove the front door.
See P.14
2. Remove two screws [1] and remove
the finisher unit left front cover [2].
1. Remove the tray unit.
See P.18
2. Remove the finisher unit.
See P.21
3. Remove four screws [1] and remove
the finisher unit rear cover [2].
4. Disconnect the connector [3].
3. Other
13