Image Transfer Belt Unit; Tray 1 Feed Roller; Tray 1 Separation Roller - Konica Minolta bizhub C250 Service Manual

Field Service Ver. 3.0 Aug. 2006
6.4.2

Image Transfer Belt Unit

[1]
6.4.3

Tray 1 Feed Roller

[1]
6.4.4

Tray 1 Separation Roller

1. Remove the Image Transfer Belt
Unit.
See P.31
2. Using a dried soft cloth, wipe the
Image Transfer Belt [1].
NOTE
• If it is difficult to clean with dried
soft cloth, dampen a soft cloth with
a solvent.
• Do not wipe out with water.
• When solvent is used to dampen a
cloth, do not use the ones other
4038F2C174DA
than shown below:
isopropyl alcohol, ethyl alcohol,
PPC Cleaner, Sol mix AP-7.
• After cleaned with the solvent,
make copies more than 28-piece of
A3 white paper to eliminate the
image noise.
1. Slide out the Tray 1.
2. Using a soft cloth dampened with
alcohol, wipe the Tray 1 Feed Roller
[1] clean of dirt.
4038F2C175DA
1. Slide out the Tray 1.
2. Remove two Screws [1], and remove
the Tray 1 Paper Separation Roller
mounting bracket Assy [2].
[2]
[1]
4038F2C002DB
6. Other
153