Konica Minolta bizhub C250 Service Manual page 376

Field Service Ver. 3.0 Aug. 2006
Error code
3008 POP3_DELETE_FAIL_ERR
3009 POP3_MAILBOX_FULL
Not Ready
• Tried to transmit or receive an E-Mail when the
4103
machine was not yet in the E-Mail receiving
status after power was turned ON.
4104 SMTP Channel Not Ready
4105 POP3 Channel Not Ready
4106 Not Ready other than the ones listed above.
NOTE
• When a code other than the ones listed above is displayed, contact KONICA
MINOLTA and inform the error code.
C. When connecting by Fax modem
2
Error code
T50 Host terminal ID not correct
R80 Serial number received from the host not correct. • Check the status of the
R81 Disconnection of writing instruction from host
during machine is running.
R82 Disconnection of FAX-CSRC instruction when
FASX-CSRC is not allowed.
R83 Host command error.
R84 NVRAM writing error.
NOTE
• When a code other than the ones listed above is displayed, see the FK-502 Service
Manual.
Error
Error
10. Service Mode
Solution
• Check the POP3 Server envi-
ronment on User's side.
• Check the POP3 Server envi-
ronment on User's side.
• Wait for a while and try trans-
mitting again.
• Wait for a while and try trans-
mitting again.
• Wait for a while and try trans-
mitting again.
• Wait for a while and try trans-
mitting again.
Solution
• Check the telephone number
set for host.
Machine registration on host
side.
• Wait for a while and try trans-
mitting again.
• Check the status of the
Machine registration on host
side.
• Contact KONICA MINOLTA
and inform the error code.
• Contact KONICA MINOLTA
and inform the error code.
333