Network Setting - Konica Minolta bizhub C250 Service Manual

8. Utility Mode
8.6.5

Network Setting

A. TCP/IP Setting
(1) TCP/IP Setting
Functions • To set whether to enable or disable TCP/IP setting.
Use • To disable TCP/IP setting.
Setting/ • The default setting is ON.
Procedure
NOTE
• When the setting is changed, turn off the Main Power Switch and turn it on
again more than 10 seconds after.
(2) IP Address Setting Method
1
Functions • To set whether to enter the IP address directly or to obtain it automatically.
Use • To change the method for setting the IP address.
Setting/ • The default setting is Auto Input.
Procedure
• When it is set to [Auto Input], select the method to obtain it automatically.
DHCP Setting
BOOTP Setting
ARP/PING Setting :
AUTO IP Setting
NOTE
• [ARP/PING Setting] and [Auto IP Setting] cannot be set to "OFF" simulta-
neously.
• They will all be set to "ON" when [Manual Input] is changed to [Auto Input].
(3) IP Address
• It cannot be set when [IP Address Setting Method] is set to "Auto Input".
1
Functions • To set the IP address of the device used in the network.
Use • To enter the IP address of the machine.
Setting/ • IP address Version 4 format
Procedure [0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
(4) Subnet Mask
• It cannot be set when [IP Address Setting Method] is set to "Auto Input".
1
Functions • To set the subnet mask of the device used in the network.
Use • To enter the subnet mask of the machine.
Setting/ • IP address Version 4 format
Procedure [0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
236
"ON"
Manual Input
: ON
: ON
ON
: ON
Field Service Ver. 3.0 Aug. 2006
OFF
"Auto Input"
OFF
OFF
OFF
OFF