Cleaning Of The Image Transfer Entrance Guide - Konica Minolta bizhub C250 Service Manual

Field Service Ver. 3.0 Aug. 2006
B. Reinstallation Procedure
[1]
3.6.3

Cleaning of the Image Transfer Entrance Guide

2
4038F2C026DA
[2]
4038F2C027DA
[1]
4038F2C607DA
3. Periodical check
1. Insert the Transfer Belt Unit [1].
NOTE
• Insert the Transfer Belt Unit with
care not to allow its docking gear to
be damaged by hitting it against the
rail or associated part.
• Do not touch the surface of the
Image Transfer Belt Unit.
• Cover the Image Transfer Belt Unit
with something such shade cloth to
protect its surface from dust or for-
eign matter.
2. Install the Image Transfer Belt Unit
with two Screws [2].
NOTE
• Replace the 2nd Image Transfer
Roller, the Ozone Filter and the
Dust Filter/Vertical Conveyance,
which are supplied with the Image
Transfer Belt Unit, at the same time.
3. Close the Right Door.
4. Reinstall the Imaging Unit and the
Waste Toner Box.
5. Turn ON the Main Power Switch.
6. Close the Front Door.
7. Select [Service Mode] → [Imaging
Process Adjustment] → [Gradation
Adjust] and carry out Gradation
Adjust.
1. Remove the Image Transfer Belt.
See P.31
2. Wipe the Image Transfer Entrance
Guide [1] clean of spilled toner and
dirt using a soft cloth dampened with
water or alcohol.
33