Initial Setting; Copier Setting - Konica Minolta bizhub C250 Service Manual

Field Service Ver. 3.0 Aug. 2006
8.5.3

Initial Setting

• It will not be displayed when the following setting shows that Authentication Device or
1
Vendor is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
Functions • To register the default setting for the Copy mode function, the Scanner mode func-
tion, and the Fax mode function.
* The machine is initialized at the following timings:
• The Main Power Switch is turned ON.
• Panel is reset.
• In an Interrupt mode.
• Auto Reset
• The password entry screen for account Track is changed.
Use • To change the Initial mode setting to meet the user's need.
Setting/ <Current Setting>
Procedure • To register the Copy mode, scanner mode, or Fax mode set on the panel.
• Carry out this setting after the necessary setting for each mode.
<Factory Default>
• Mode set prior to the shipping.
• The corresponding setting will be the one which has been set prior to the shipping by
carrying out this setting from each mode screen.
8.5.4

Copier Setting

A. Auto Paper Select for Small Original
Functions • To make the copy setting when the paper is undetectably small, or no original is
being set.
Use • To copy the original such as business cards with which the Original detection is not
effective.
Copy on Small Size : Copies on A5 paper.
Copy on A4/Letter
Prohibit Copy
Setting/ • The default setting is Prohibit Copy.
Procedure
Copy on Small Size
B. Auto Booklet ON when Fold & Staple
Functions • To set whether to set the Auto Booklet when Fold & Staple is selected.
Use • To cancel setting the Auto Booklet when Fold & Staple is selected.
Setting/ • The default setting is Auto Select Booklet.
Procedure
: Copies on A4 or Letter size paper.
: Does not copy since the original size cannot be detected.
Paper Feed Tray needs to be selected prior to pressing the
Start key.
Copy on A4/Letter
"Auto Select Booklet"
8. Utility Mode
"Prohibit Copy"
OFF
193