Konica Minolta bizhub C250 Service Manual page 300

Field Service Ver. 3.0 Aug. 2006
(8) Prefix/Suffix Setting
<ON/OFF Setting>
Functions • To set whether to add Prefix or Suffix to the address when calling or entering an
address.
Use • To add Prefix or Suffix to the address.
Setting/ • The default setting is OFF.
Procedure
<Prefix/Suffix Setting>
Functions • To register or change the Prefix or Suffix.
• Eight types of Prefix and Suffix can be added.
Prefix: Letters added to the top of the text (Header part)
Suffix: Letters added to the bottom of the text (Footer part)
Use • To register or change the address displayed for Prefix or Suffix.
Setting/ • Available number to be registered as Prefix is up to 20 characters.
Procedure • Available number to be registered as Suffix is up to 64 characters.
(9) Action for Invalid Certificate
1
Functions
• To set how to process the Job when SSL Certificate becomes invalid.
Use
Setting/ • The default setting is Continue.
Procedure
J. SNMP Setting
1
(1) SNMP Setting
Functions • To set whether to use SNMP (Simple Network Management Protocol) or not.
• To set the SNMP Version to be used.
Use • Not to use SNMP.
• To readout Management Information Base and to enter Community name for writing.
Setting/ • The default setting is ON.
Procedure
• To individually set whether or not to use SNMP v1/v2c (IP), SNMP v3 (IP), and
SNMP v1 (IPX).
• The default setting is ON.
(2) UDP Port Number
Functions
• To set the UDP standby Port Number which is used for SNMP (IP).
Use
Setting/ 1. Touch the Clear key.
Procedure 2. Enter the Port Number between 1 and 65535 using the 10-key pad.
ON
"Continue"
"ON"
"ON"
8. Utility Mode
"OFF"
Delete the Job
OFF
OFF
257