Konica Minolta bizhub C250 Service Manual page 397

10. Service Mode
E. Sensors 3
• When the finisher FS-501 is mounted.
2
Symbol Panel Display
PC1-FN Multi Exit (Non-sort1)
Staple
Finisher
PC19-FN Exit (Non-sort3)
PC3-FN Exit (Finisher)
PC4-FN Upper Paper Pass Upper Entrance Sensor
PC2-FN Transport Lower
PC6-FN Full (Non-sort1)
PC20-FN Full (Non-sort3)
PC7-FN Full (Elev. Tray)
PC5-FN Empty (Finisher)
PWB-D Surface (Elev.)
FN
PC8-FN Empty (Elev.)
PC9-FN Home (CD-Align)
PC14-FN Staple Standby
PC12-FN Home (Store
roller)
PC13-FN Home (Exit roller) Exit Roller Home Position Sensor
- Staple Home
- Staple Empty
- Self Priming
S2-FN Elevator Tray
S3-FN Upper Limit
PC10-FN Shift Home
PC11-FN Shift Motor Pulse
354
Field Service Ver. 3.0 Aug. 2006
Part/Signal Name
1st Tray Exit Sensor
Job Tray Exit Sensor
Storage Sensor
Lower Entrance Sensor
1st Tray Full Sensor
Job Tray Full Sensor
Elevator Tray Full Sensor
Finisher Tray Paper Sensor
Elevator Tray Upper Limit Sensor
Elevator Tray Paper Sensor
CD Aligning Home Position Sen-
sor
Staple Home Position Sensor
Storage Roller Home Position
Sensor
Staple Home 1
Staple Empty 1
Staple Self Priming 1
Elevator Tray Upper Limit Switch
Elevator Tray Upper Limit Switch
Shift Home Position Sensor
Shift Motor Pulse Sensor
Operation Characteristics/
Panel Display
1 0
Paper Paper not
present present
Paper Paper not
present present
Paper Paper not
present present
Paper Paper not
present present
Paper Paper not
present present
Blocked Unblocked
Paper Paper not
present present
Blocked Unblocked
Paper Paper not
present present
Paper Paper not
present present
Blocked Unblocked
Blocked Unblocked
Blocked Unblocked
Blocked Unblocked
Blocked Unblocked
Unblocked Blocked
Unblocked Blocked
Unblocked Blocked
ON OFF
Unblocked Blocked
Unblocked Blocked