Replacing The Fusing Unit - Konica Minolta bizhub C250 Service Manual

Field Service Ver. 3.0 Aug. 2006
3.6.8

Replacing the Fusing Unit

CAUTION
• Before replacing the Fusing Unit, ensure that it has had time to cool down.
[1]
[5]
1. Open the Front Door.
2. Turn OFF the Main Power Switch
and unplug the power cord from the
power outlet, then wait for about 20
minutes.
[2]
3. Remove the Sub Tray.
See P.82
4. Remove the Screw [1], and remove
the Exit Tray Connector protective
cover [2].
4038F2C028DA
5. Disconnect the Connector [3].
[3]
4038F2C029DA
6. Remove the Screw [4], and remove
the Connector protective cover [5].
[4]
4038F2C030DA
3. Periodical check
39