Konica Minolta bizhub C250 Service Manual page 178

Hide thumbs Also See for bizhub C250:

Table of Contents

Field Service Ver. 3.0 Aug. 2006

4036fs2559c0

4036fs2560c0

4036fs2561c0

4036fs2562c0

6. Wind the fixed bead end of the cable

around the pulley five turns clock-

wise, from the front toward the rear

• Make sure that no part of the cable

rides on the other.

7. Wind the hook end of the cable

around the pulley five turns counter-

clockwise, from the rear toward the

• Make sure that no part of the cable

rides on the other.

8. Slip the Cable Holding Jig [6] onto

the pulley to secure the cable in posi-

9. Install the front and rear pulleys [7]

and bushings [8] onto the shaft [9]

and fit the C-clip [10].

Chapters

Table of Contents