Konica Minolta bizhub C250 Service Manual page 288

Hide thumbs Also See for bizhub C250:

Table of Contents

Field Service Ver. 3.0 Aug. 2006

(6) WINS Setting

• To set whether or not to enable the WINS setting.

• To use the WINS (Windows Internet Name Service) setting is necessary.

• By using the WINS, the traffic by broadcast can be reduced, and the communication

becomes available with the network where broadcast does not reach.

• The default setting is ON.

(7) Auto Obtain Setting

• To set whether or not to enable the Auto Obtaining of the WINS Server Address.

• To acquire the WINS Server Address automatically.

• To obtain the WINS Server Address from DHCP server. If there are more than on

address settings, up to two can be acquired.

• The default setting is Enable.

• "Enable" cannot be set when [IP Address Setting Method] is set to "Auto

(8) WINS Server Address 1, 2

• To set the WINS Server Address.

• To use when manually entering the WINS Server Address.

• The Primary Address and the Secondary Address can be set.

(The primary Address has the priority during operation.)

• IP address Version 4 format

[0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]

1. Touch [WINS Server Address 1] or [WINS Server Address 2].

2. Enter the WINS Server Address.

(9) User Authentication (NTLM)

• To set whether or not to enable the User Authentication setting by NTLM.

• To use when conducting the User Authentication by NTLM (NT LAN Manager).

• The default setting is ON.

(10) SMB TX Setting

• To set whether or not to use the SMB transmission setting.

• To use when setting the SMB transmission setting.

• The default setting is ON.

8. Utility Mode

Chapters

Table of Contents