Communication System Setting - Konica Minolta bizhub C250 Service Manual

10. Service Mode
10.8.9

Communication System Setting

2
Functions • To select communication system used for RS-232C port.
Use • To switch RS-232C port in order to connect with the CS remote care modem or the
JScribe- enabled-device.
• Communication requirements for each setting are shown below.
NOTE
• When the JScribe function is used, the following functions will be invalid.
<Copy functions>
• Sequential number print, Date/Time stamp, Page # stamp, Copy Protect, Photo
copy
<PC print functions>
• Sequential number print, Copy Protect
Setting/ • The default setting is CS Remote Care.
Procedure
10.9 System 2
10.9.1 HDD
Functions
Use
• Not Used.
Setting/
Procedure
338
CS Remote Care
Baud rate 9,600 bps
Data bit 8 bit
Parity bit None
Stop bit 1 bit
"CS Remote Care"
Field Service Ver. 3.0 Aug. 2006
JScribe1
19,200 bps
7 bit
Odd
1 bit
JScribe1 JScribe2
JScribe2
19,200 bps
8 bit
None
1 bit