Toshiba Strata DK 280 Installation Manual page 771

Call Forwarding a Primary
or Phantom Directory
Number:
1. Press the [PDN] or
[PhDN] that you want
to Call Forward.
2. Enter a Call Forward
Access Code
(#I 6 0 I- #I 6 0 4).
[Clll]
-.
3. Dial the number to
which calls will forward.
4. Press SDS + RDL +
SPKR.
Call Forwarding a Primary and/or Phantom Directory Number
Your telephone has a Primary Directory Number [PDN] which can only be call
forwarded from your telephone.
To set Call Forward for a Phantom [DN]. your phone must be programmed as the
owner of [PhDNs].
Your telephone can be programmed to have up to eight [PhDNs]. Up to eight
[PhDNs] can be set to Call Forward by entering a specific access code, but only
four of them can have dedicated messaoe waitino buttonslLEDs. lPDNs1 and
[PhDNs] can be independently set for Cai FowardIAll Calls, Call F&ward-'Busy,
Call Forward-No Answer, and Call Forward-Busy/No Answer. Calls to your [PDN]
or [PhDN] will be forwarded to the destination phone number according to the
call fotwarding mode you have chosen.
You will hear a steady dial tone and see a steady LED.
The dial tone will go silent, and the LED will flash intermittently.
The screen will display the number you are forwarding to and you will hear a
short, steady confirmation tone followed by a pulsing Re-order tone. The LED
will continue to flash intermittently.
The dial tone will go silent and the LED will go off. The LCD will display a
message indicating call forwarding, the Call Forward type, the Phantom Directory
Number that the call is being forwarded from, and the destination number to
which the call is forwarded.
To Cancel a Call Forward:
Press the [PDN] or
[PhDN] you want to
cancel Call Forwarding
0".
Dial # 6 0 1.
Press SPKR.
To Park and Park/Page
(Automatic
Orbit
Selection):
While connected to a
calling party, press
PARK or CPIPG.
Enter 9 9 9 and the
system will park the call
on an Orbit (9 0 0 -
9 19).
To Page, enter a Page
Zone access code (see
Table 1) or Directory
Number.
You will hear a steady dial tone and sea a steady LED light
The dial tone will go silent, and the LED will flash intermittently.
The LED will go off. Call forwarding for the selected [PDN] or [PhDN] is now
canceled.
Call Park/Park and Page
If you have an LCD telephone, you can use cqde 9 9 9 to let the system
automatically select an available orbit when you park a call. The selected orbit
number will be shown on your LCD. You can use the Park feature with the Page
feature. For more information on Cell Park, refer to the Digital Telephone User
Guide.
If your telephone does not have a PARK button, press CONFfMNS + # 3 3 2
to park the call. If your telephone does not have a CPIPG button, press
CONF/TRNS + # 3 3 1 to park and page.
When you press 9 9 9, the system will automatically select the lowest vacant
Orbit Number for your parked call.
4 If you pressed PARK in Step 1, your telephone LCD will display the orbit
number in which the call is parked.
n If you pressed a CPfPG in Step 1, you will hear a short burst of dial tone to
prompt you to enter the Page access code. Your telephone LCD will display
the orbit number in which your call is parked.
22
23