Toshiba Strata DK 280 Installation Manual page 765

c
fiYisc-]
-,
Caller ID Calls:
See Automatic Number
Identification on page 6.
Call Pickup:
[,,,,::;:::i
e)
Calling Number-Internal:
[-iIII(HI
CO Line Identification:
"CF.A" denotes Call Foward-All Calls from PPP to RRR.
Press SCRL.
"CF-B" denotes Call Forward&sy from PPP to SSS.
Press SCRL.
"CF-NA" denotes Call Foward-No Answer from TlT to UUU.
Press SCRL.
"CF-BN" denotes Call Forward-Busy/No Answer from VVV to UUU.
press SCRL.
When you pick up an internal ringing call, the calling station's [PDN] is displayed
on the left and the station number called is displayed on the right.
Your LCD telephone displays information noting that your call to station (MMM)
was picked up by station (WWW).
When you receive an internal call, the calling station's [PDN] (LLL) is displayed,
even if you ware called from a [PhDN] on that station.
The CO lines can be programmed to display an identifying name of up to 16
characters. The name will be displayed on outgoing and incoming calls.
10
CO Line Number:
1.
2.
3.
4.
5.
6.
Incoming Call
[-YYZtZj
When Call Is Answered
=I
Hold
I:::",:'::,':,:,,I
.._
Hold Recall
[::":,:::,_i
Outgoing
1-J
CO Line Queuing
(Callback)
Incoming CO call-the system station line number displays if your station is
programmed for incoming ringing on that CO line, as long as no CO identification
is programmed.
Transferred CO call-CO line is transferred to your station in the ringing state
by another station.
Camped-on CO call-CO line was camped-on to your busy station and rings
your station when you hang up.
The display changes to indicate calling status.
You have put a CO line call on hold at your station.
Held call automatically recalls your station after a programmed period of tlme.
When you manually select a CO line. it is displayed. This display IS replaced by
the dialed number.
When the CO line queuing feature rings back to your station with an available
CO line, that line number will be displayed.
11