Toshiba Strata DK 280 Installation Manual page 185

4. Remove the telephone number directory tray from
5. Check Table 7-4 in Chapter 7-Wiring
Diagrams;
the original telephone base and install it on the
install two-pair house cable (or external
power)
integrated unit telephone base. Bend the tray by
and two-pair modular cord (supplied with
PDIU-DI)
squeezing its sides so it bows slightly to remove
if required to achieve maximum distance.
and re-install (Figure 5-4 or 5-5).
RS-232 (FEMALE)
TELEPHONE
TOP ASSEMBLY
Figure 5-4
RPCI-DI or PDIU-DI2 Installation Into 2000~Series Digital Telephone
RS-232 (FEMALE)
DB-25 CONNECTOR
TELEPHONE
T OP ASSEMBLY
/
TO P2 OF
BOTTOM PCB
IMPORTANT: DO NOT CONNECT
DIU CABLES TO HHEU CONNECTOR
DIRECTORY TRAY
General Notes:
l
A IOOO-SERIES DIGITAL TELEPHONE CANNOT
SUPPORTAN HHElJ AND A PDIU-DI AT THE SAME TIME.
. IOOO-SERIES TELEPHONES DO NOT SUPPORT RCPI-D/s.
Figure 5-5
PDIU-DI Installation Into 1 OOO-Series Digital Telephone
PERCEPTION
STRAP (ONLY CUT
IF INSTALLED ON
PERCEPTION)
PDI IU-DI 1000 ' DIGITAL
TEL WEPHONE BASE
January
1996
5-5