Toshiba Strata DK 280 Installation Manual page 460

Program 23 -
Primary Built-in Auto Attendant Announcement Device Assign&ents
nrsrln~~nnnn-rSpkrlnnl-(-(Spkr(rl-[lnIn-I-I-rlllI~ll
SELECT = 1 -'4 1 x"TO ATT 1 NO. = Port
Select the Auto
Enter the station logical port number to
Attendant Device which the device will be assigned.
(Digital Announcer).
Device Port Number
1
2
3
I 4 I
Program 24 -
Secondary Built-in Auto Attendant Announcement Device Assignments
SELECT= 1 -4--1
Select the Auto
Attendant Device
(Digital Announcer).
t- AUTO AIT 2 NO. = Pot-t
Enter the station logical port number
to which the device will be assigned.
I
Device
I
Pot-l Number
I
I 4 I
Program 25-1
- Incoming Built-in Auto Attendant Call Overflow Time
SELECT = 1 -I
l- AAIT TIME = Seconds Before Overflowing
Enter the number of seconds,
12-24.
General Notes:
l
For more information, see the instructions preceding the record sheets.
l
Overflow stations and delay ring operation is assigned in Programs 81 - 89.
l
Default overflow time is 20 seconds.
l
This overflow time applies to the overflow of incoming Auto Attendant caiik to
normal CO line ringing if either a primary announcement device or RRCS
(DTMF) circuit is not available.
DK0121
1 LAA