Toshiba Strata DK 280 Installation Manual page 493

Program 39 -
Alert Signal Button Assignments (R3)
Enter the logical Port Number w
(000 - 239) of the telephone that
will be assigned an Alert Signal Press the telephone button to
button.
which the Alert Signal button
should be assigned.
Button Function Button Labels
Alert Signal 1 Alert Signal 1 or ALERT1
(Name)
Alert Signal 2 Alert Signal 2 or ALERT2
(Name)
Alert Signal 3
Alert Signal 3 or ALERT3
(Name)
Alert Signal 4
Alert Signal 4 or ALERT4
(Name)
Code
427
428
429
430
the Program 39 code for the Alert Signal
button that should be installed.
Notes
This button will signal the station number
programmed in Speed Dial *48
This button will signal the station number
programmed in Speed Dial *47
This button will signal the station number
programmed in Speed Dial *46
This button will signal the station number
programmed in Speed Dial, *45
Alert Signal Button Programming Example:
Station 200
Station 202
Code = 427
SD *48 = 202
, Signal 1
Station 201
Code = 427
SD *48 = 203
+
IMPORTANT !
1. Both partner stations must have the same Alert Signal button number programmed in Program 39 and
the appropriate Speed Dial Number programmed to allow the Alert Signal buttons to operate. (See the
record sheet on the next page.)
2. The Alert Signal will be sent to one partner station when the other partner station pr&ses the "Signal"
button. The Alert Signal is 4-short bursts of tone, sent two times/three seconds apart - it will be sent
to
stations that are idle or busy, or in Call Forward or Do Not Disturb mode. No talk path will exist before
or after the Alert Signal is activated.
January 1996
1n 77