Toshiba Strata DK 280 Installation Manual page 510

Program 59 -
Attendant Console Flexible Button Codes' (continued)
SELECT = Port Number
or range. See Note 2 to enter a range of ports.
Press LED/button
to be defined. -I
See tables on the following pages.
- Code: Enter the appropriate code that
corresponds to the feature to be assigned.
See the table below.
Button Function Button Labels Code Notes
~ Save Last Dialed Number Save Last Number or SAVE 485 Saves last number dialed for future speed dial.
Speed Dial Select (* Button) Speed Dial or SDS 497 Begins speed dial selection.
Station Speed Dial Codes SD *10 - *49
Reserves button for station speed dial.
System Speed Dial Codes6 SD *600 - *699 Speed dial number set by station port 000.
- or -
~460 - *69
Tone
Tone Dial Select or TONE
Notes:
1. Some assignments are not available in Release 1 or 2.
490 CO dial signals set to tone or pulse.
DKO224
2. Specify a range of ports by keying in:
q clcl~c1ncl
Low potK=---
I- High port
3. See Program x75 for Tenant Group assignments.
4. Picks up calls to telephones in any call pickup group to which the telephone is assigned in Program *3 1.
5. Available with RCTUA3, RCTUBA3/RCTUBB3 or RCTUQ'D3 Release 3 or above only.
6. RCTUA and RCTUA3 provide 40 system speed dial numbers (60 - 99), RCTUB, RCTUBAIRCTUBB, and RCTU
C/D
provide IO0 system speed dial numbers (600 - 699).
General Notes:
l
Attendant Consoles cannot be equipped with Secondary or Phantom
[DNs].
The console Directory Number is
assigned to the console port number in Program 04. The console [DN] can have only one appearance.
l
Complete Program 38 before Program 39.
9 initialized data assigns the keystrip pattern associated with Code 31 from Program 38.
1 O-96 January 1996