Toshiba Strata DK 280 Installation Manual page 748

c
To Supervise a Tandem Call
and Release It:
1. Press either [DN] or
CO line button.
2. If the parties have hung
up. go back on-hook
- or -
if the patties are still
talking, CONFlTRNS
and hang-up.
To Enter a Timed Reminder:
1, Press a [DN] and dial
#605-#609.
2. Enter the desired time.
3. Press 0 for the
reminder to be
repeated every day, or
1 for a one-time
reminder only.
4. Enter desired LCD
message number,
personal (1 0 - 19) or
system (6 0 - 9 S), or
0 0.
5. Press RDL.
Supervision
After you press the button, you will be connected to both CO lines and both Line
LEDs will flash at the In-use rate.
Both Line LEDs will turn off and the connection will be released.
Timed Reminders
You can set five separate reminders at your station. Your telephone will sound a
distinct beeping at the exact minute and hour you set for any of these reminders,
either one time or daily.
You have a choice of five different reminders
Set the time by entering two digits for the hour of the day (HH), then two digits for
the minute. The timer is based on a 24.hour clock, so for example, to enter a
reminder for 8:03 p.m., enter 2 0 for the hour (8 pm. is the 20th hour of the day),
then 0 3 for the minutes.
Enter 0 0 if your telephone does not have an LCD or if you do not want a
message to display when the time reminder tone sounds.
The time will be recorded in memory and you should hear a beeping tone for 30
seconds (or until cancelled by going off-hook) when the hour and minute occur.
72
To Cancel a Timed
Reminder:
1. Press a [DN]. then dial
#605-#609.
2. Press RDL.
To Override/Change Toll
Restriction:
1. Access an outgoing line
using a CO line or
PNI.
2. Press CONFITRNS
and enter # 4 7.
3. Enter the Toll
Restriction Override
Code (four digits).
4. Dial a telephone
number.
Dial # 6 0 5 to cancel the reminder set for # 6 0 5 or dial # 6 0 6 to cancel the
reminder set for # 6 0 6, etc. You can only cancel one reminder at a time.
The reminder will be cancelled.
Toll Restriction Override
Stations can be individually restricted from making toll calls. Each station can be
allowed or denied soecific area and office codes. lono distance information calls.
-
international calls and/or operator-assisted calls. You can completely override
Toll Restriction at selected stations or you can change the station's Toll
Restriction class. The station will resume its normal class at the conclusion of
the call.
After pressing a CO line button, you will hear dial tone and the Line LED will
flash at the in-use rate.
See Appendix A-Table l-CO Line Access Codes. Ask your System
Administrator for the proper code to be used for this type of call.
You will no longer hear dial tone.
You will hear dial tone. For security reasons. the override codes are only
available on a selected basis. See your System Administrator.
73