Toshiba Strata DK 280 Installation Manual page 746

c
To Link a Number:
1. Press RDL or #.
2.
press SDS or * and
enter a Soeed Dial
accesscode
3.
4.
For station 2 0 0, enter
a three digit System
Speed Dial code.
Press SDS or *.
Enter the three- or two-
digit code to which the
number will be linked
(6 9 O-6 9 9
- or -
5.
6.
9 0 - 9 9).
Enter the telephone
number to be stored.
Press RDL or #.
Before linking a number to Speed Dial Numbers 6 9 0 - 6 9 9, you should store a
number, such as a long distance carrier acce?& code, in the linked-to number
(6 9 0 - 6 9 9) from Station 200 using the Speed Dial storing guide line on the
previous page.
Station users may enter Station Speed Dial codes (1 0 - 4 9). Station 200 can be
used to enter System Speed Dial codes 6 0 0 - 6 6 9.
Only 10 System Speed Dial codes may be linked to any other Speed Dial
numbers: 6 9 0 - 6 9 9. if system your has 100 System Speed Dial codes; or
9 0 - 9 9, if your system has 40 codes.
Up to 17 digits can be stored.
The number will be stored and will be dialed out when the optlonal linked Station
or Svstem SD button is Dressed or the linked Svstem or Station Speed Dial
.x&s code is dialed.
Linked Speed Dial Example:
Store automatic CO line access plus a long distance carrier access code (10288)
in the Svstem Soeed Dial location 690 and link this code to a teleohone number
stored in Speed Dial location 600 of any station
1. Store the CO line acce.ss code and the long distance carrier code (1910288)
in the System Speed Dial location 690 from Station 200:
Press RDL and SDS + 6 9 0 + [PDN] + 9 10 2 8 8 + RDL. The CO line
access code is 9. The long distance carrier access code 10 2 8 8; [PDN] is
used to automatically access internal dial tone before dialing 9 10 2 8 8.
To Call with a Speed Dial
Button:
1. Access a CO line.
2. Press SD.
To Call with a Speed Dial
Access Code:
1. Access a CO line.
2. Press SDS.
3. Enter the Speed Dial
Access code.
2. Store the System Speed Dial information on Speed Dial Code 10 at Station
201:
PressRDL+SDS+lO+SDS +690'l7145833700+RDL
3. After Steps 1 and 2 of this example are completed, when station 201 uses
Speed Dial 10, the telephone will automatically dial 9 to access a CO line,
then it will dial the carrier access code plus the telephone number.
Stored Station or System Speed Dial Calling
You can call stored Speed Dial numbers with the touch of a button or by dialing a
brief Speed Dial code. To store weed dial numbers onto an SD button or access
code, see the previous instructi&. Speed Dial buttons are assigned to stations
in system programming.
See Appendix A-Table l-CO Line Access Codes.
The system will dial the telephone number assigned to the button
See Appendix A-Table l-CO Line Access Codes
Press * if your telephone does not have the SDS button.
Station Speed Dial codes are 1 0 - 4 9 and System Speed Dial codes are 6 0 0
- 6 9 9 or 6 0 - 9 9. The system will automatically dial the telephone number
assigned to the dialed code.
68 69