Rctuc Controls, Indicators, And Interface Connectors - Toshiba Strata DK 280 Installation Manual

Table 4-3

RCTUC Controls, Indicators, and Interface Connectors

RCTUC Ribbon Cable Connector P2
DTMF Receiver Connector P3
DTMF Receiver Connector P4
DTMF Receiver Connector P5
DTMF Receiver Connector P6
BATT Battery Jumper P9
RCTUC Ribbon Cable Connector P I 1
Volume Control VR1
RRCS
CONNECTORS-
RRCS
CONNECTORS.
Figure 4-6
4-1 0
Type of Component
Connector and
ribbon cable
I
6-pin male connector
10-pin male connector
6-pin male connector
3-terminal jumper
RCA jack
Connector and
ribbon cable
Trim potentiometer
. . . . . . . . . .
P6
PROGRAM
ROM
RCTUC
CONNECTORS
To RCTUD
Description
Ribbon cable connector for connection to
RCTUD. Used in conjunction with P2.
I
Interface connector for ot3ional DTMF
I
Receiver subassembly (RRCS).
Used in coniunction with P4. P5. and P6.
I
Used in conjunction with P3,
Interface connector for optional DTMF
Receiver subassembly (RRCS).
Used in coniunction with P3, P4, and P6.
Interface connector for optional DTMF
Receiver subassembly (RRCS).
Used in conjunction with P3, P4, and P5.
Interface connector fqr on-board lithium
battery that protects configuration data
stored in system RAM.
Interface connector for MOH/BGM source.
Ribbon cable connector for
RCTUD. Used in conjunction with P2.
Adjusts volume for MOH/BGM source
connected to RCTUC.
0
I
I
(RCAJACK)
VOLUME CONTROL
RIVER ADJUSTMENT)
and P6.
P5,
January 1996