Flexible Button Codes For Digital And Electronic Telephones - Toshiba Strata DK 280 Installation Manual

Program 39 -
Flexible Button Assignment'
,
SELECT = Port Number
or range. See Note 2.
Press LED/button to be defined.
Code: Enter the appropriate code that
See tables on the following pages:
corresponds to the feature to be assigned.
See Table 1 O-l below.
Table 10-l
Flexible Button Codes for Digital and Electronic Telephones
Button Function Button Labels Code Notes
Account Code Account Code or ACCNT 450
Allows a Voluntary Account
Code to be entered.
Alarm Alarm Reset or ALRM 477
Resets alarm condition system-wide.
Alert Signaling (see following pages)
I
All Call Voice Page
I
All Call Page or AC
I
489
I
Pages up to 120 idle electronic or digital telephones over
soeaker.
Automatic Busy Redial Auto Busy Redial or ABR 470
Sets ABR of busy outgoing number.
Automatic Callback Busy Auto Callback or ACB 494
Sets ACB for station recalled by busy line.
Backaround Music 1 Tel Set Music or BGM 1478
Turns BGM ON or OFF through station speaker.
Call Forward All Calls Call Frwd All Calls or CFAC 487
All calls forward to selected station.
Call Forward AC. Fixed 1 Call Frwd to: or CFF 1486 Forwards all calls to me-defined destination. See Prooram 36.
Call Forward Busy Call Frwd Busy or CFB
459 Forwards calls to selected station if station is busy.
Call Forward Busv/No Answer Call Frwd Busv/NAns or CFB/NA 457
Forwards calls to selected station if station is busv or does not
Call Forward External
Call Foward No Answer
,
Call Frwd External or CF-EXT
Call Frwd No Answer or CFNA
460
458
answer.
Forward calls externally.
Forwards calls to selected station if station does not answer.
Call Parks Park in Orbit or PARK (R3) 464
Call Park Only.
I
Call Park LCD Displays
I
Park Orbit Dlsplay or CPD (R3)
I
465
CP Display Button and Mode 64 can be used interchangeably. '
Displays call parked via telephone LCD.
Call Park and Paaea
I I I
1 Call ParklPaae or CPlPG (R3)
1463 1 Parking and Paging Park Pickup.
I
1 Call Pickup (Directed) 1 Directed Pickup or PKUP 1484
1 Picks up ringing or held intercom, trunk calls, and page.
-1
Call Pickups Tenant 4 1 PKUP4 435
Picks up tenant 4's ringing CO calls.
I
Call Pickups Tenant 3 PKUP 3 436
Picks up tenant 3's ringing CO calls.
Call Pickups Tenant 2 PKUP 2 437
Picks up tenant 2's ringing CO calls.
Call Pickups Tenant 1 PKUP 1 438
Picks up tenant l's ringing CO calls.
I
Call Pickup (Group)4
I
Group Pickup 480
Picks up a call to any group to which station is assigned in
x31
I
-
Unanswered Caller ID and/or Lost Call Auto Dial (R3) or 462
Will Auto Dial a Caller ID and/or Automatic Number Identification
ANI Stored Number Auto Dial LCAD
(ANI) telephone number that was stored in station Caller ID/AN1
memory.
CO Line Appearance Line 1 -144orCOOOl-CO144
001 -144 CO line access of appearing calls.
Data Data Call or DATA 456
Used to place data call.
Data Release Data Release or DRLS
Direct Station Selection
DSS
454
Releases data call.
#Dot) I #2Sg Assigns DSS hotline keys to port number.
I
Drrectory Numbers (see following pages)
~-1
Do Not Disturb
I
Do Not Disturb or DND
I
498
I
Prevents calls to station.
DK0223
1 O-72
January
1996