Toshiba Strata DK 280 Installation Manual page 504

Digital business telephone system
Hide thumbs Also See for Strata DK 280:
Table of Contents

Advertisement

Program 61
-
Station
Memory
Allocation
to Store Caller
ID and/or
ANI
Numbers
on
Abandoned/Unanswered
Calls (R3)
n[lilnl;;liilR~nlS1-Ispkrln~~~-~nnrl-~-[lnn-lHola-Spkr/lSIJllijJHold(-(Spkrl[il(/iillHoldl
Station Port Number* (000 - 239')
7
TBUF
= 000, 010,020,
030,040,060,
070,080,
* To enter a range of station ports
090,1002
ENTER: [rJ-B-[-\rirj
IDL = Total Number Available2*3 (Initial - 1000)
Low Port (
T
High Port
Initial:
RCTUCB/DB
= 1000
RCTUBAIBB
= 400
RCTUA3
= 200
I
I
I
I
I
I
I
Notes:
OK0237
1. If a Caller ID CO line is programmed
to direct ring more than one station (81 - 89) a station logical port must be assigned
as
owner of the ground
and/or loop start Caller ID line (in Program
*52) to be able to store Caller ID numbers
on abandoned
or
unanswered
calls on Direct Incoming
calls. If a Caller ID CO line is programmed
(87-89)
to ring only one station, that station
will store Caller ID abandoned
call information
regardless
of Program
%2 data - the station must have storing
memory
assigned
in Program
WI. ANI abandoned
call numbers
will be stored in the telephone
memory of the called Primary Directory
Number
[PDN] owner telephone
or the called Phantom
Directory
Number [PhDN]
owner telephone.
Transferred
Caller ID
and/or ANI line abandoned
call numbers
will be stored in the "transferred-to"
telephone
memory if that telephone
is assigned
memory in this program.
(see Program
62).
Call forwarded
Caller ID and/or ANI line abandoned
call numbers
will be stored in
the [PDN] or [PhDN] owner telephone
memory if that telephone
is assigned
memory in this program.
2. BUF data is the number of telephone
numbers
that can be stored at the designated
port(s).
The maximum
number
of Caller
ID/AN1 numbers
that can be stored per telephone
is 100. The maximum
number of Caller ID/AN1 telephone
numbers
that can
'be stored per DK280 system is: RCUTA: 200, RCTUBA3
/ RCTUBB3:
400, and RCTUC3/D3:
1000.
3. IDL =XxXx
will display on the program
telephone
LCD to indicate the total number of telephone
number storage bins which are
available
in the system. This number is reduced accordingly
each time memory is allocated to a station.
General Notes:
l
Initialized data = no memory for all ports.
l
ACD, Distributed
Hunt, DISA, Built-in Auto Attendant,
and Abandoned
Calls store ANIKaller
ID data in the Program
*52 CO
line owner station.
l
RCTUA3: 32 stations maximum, RCTUBA3 / RCUTBBS:
80 stations maximum,
RCTUC3/D3:
240 stations maximum.
10-88
January
1996

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents