Door Lock Control Option (Piou/Pious/Pepu) - Toshiba Strata DK 280 Installation Manual

lock. When a door lock button at a digital or electronic
telephone is pressed, the door lock control relay
unlocks the door for three or six seconds, as specified
in Program 77-1 (LED 20).
External Page Control
Configure the PIOU, PIOUS, or PEPU for the external
page mute function in accordance with the following
steps: (Refer to Figure 6-7 or 6-8.)
1. Access Program 77-1. Set LED 07 to OFF to
configure the DET/DER for the external page
function.
2. If using a PIOU or PEPU, set the jumper plug PlO
on the PIOU or PEPU jumper plug to the MAKE or
BREAK position as required:
n MAKE-Shorts the normally open contacts
(pins 7 and 32) when external page is
activated.
n
BREAK-Opens the normally closed contacts
(pins 7 and 32) when external page is
activated.
- or -
----
I
I
I
I
I
I
I
I
I
I
If using a PIOUS, solder the jumper Wi on the
PIOUS to the MAKE or BREAK position as
required:
n
MAKE-Shorts the normally open contacts
(DET and DER) when external page is
activated.
n
BREAK-Opens the normally closed contacts
(DET and DER) when external page is
activated.
3. Refer to Figures 6-7 or 6-8 for wiring/
interconnecting details. Connect the PIOU,
PIOUS, or PEPU to the.MDF as required for the
external paging function.
Door lock Control (PIOU or PIOUS or PEPU)
Configure the PIOU, PIOUS, or PEPU for the door
lock control function in accordance with the following
steps: (Refer to Figure 6-9.)
25-PAIR
PIOU/PEPU
/
AMPHENOL MDF
K( PIN 34, R-BR I&
DOOR LOCK 0 BUTTON
SEE FIGURE 6-7
/
FOR WIRING
TO DOOR LOCK
r,
SEE PROGRAM 77-l)
LED 07,20
General Note:
I
I
FOR RELAY OPTIONS
l
Unlock Door 0 (DRLK 0) 1
assigned to digital and electronic i
telephones in Program 39 with 1
Code 71. I
I
Kl/PiO (24VDC, 1 .O AMP MAX.)
PIOUS
MDF
TO DOOR LOCK
DK0310
' TERMINAL ON FRONT EDGE OF PCB
Figure 6-9
Door Lock Control Option (PIOU/PIOUS/PEPU)
January 1996
6-l 1