Toshiba Strata DK 280 Installation Manual page 486

Program 38 -
Digital and Electronic Telephone Keystrip Type (continued)
Assignments
for
2000~series Digital
Telephone keystrips are as follows:
Speed Dia11g4
Do Not Disturb
Line 7
Line 6
Line 5
Line 4
Line 3
Line 2
Line 1
Intercom orPrimary[DN]2
Code 2 1 Code 3 1 (Default)
IO-button 20-button (A)
Code 32
20-button (6)
Code 33
20-button (C)
(Keystrip notprovided, but can be assigned)
.
Assignments for 1000~series Digital Telephone keystrips are as follows:
CO15 CO16 CO173 DND SDS SD12 SD13 SD14 DND
SDS PAU RDL SDS ~ ~ DND FLASH
CO10 CO11 CO12 CO13 CO14 CO10 CO11 CO12 SD10 SD11
SD11 SD12 SD13 SD14 SD15
co5 CO6
co7
CO8
co9 co5 CO6 co7 CO8
co9 co5 CO6 co7 CO8 SD10
lNTor[PDNjZ CO1 co2 co3 CO4 INTor[PDNf CO1 co2 co3 CO4 INTor[PDNf
CO1
co2 co3 co4
Code 32
Code 33
DK0.221
Code 3 1 (Default)
PO-button(A) 20-button (B)
20-button (C)
Notes:
7. The Speed Dial button is the same as the SDS or REP buttons in previous Strata systems (Program 39,
Code 97).
2. DK280 Release 7 and 2 Intercom (INT) buttons are replaced by Primary Directory Number
[PDN] buttons in
DK280 Release 3 software.
3. This button is initialized as SD10 with RCTUA since there are only 16 CO lines.
4. If changing PEKU PCBs (electronic telephone) to PDKU PCBs (digital telephone), or vice versa, always check that
the Speed Dial or MW/Fl. button is set appropriately in Program 39.
10-70
January 1996