Toshiba Strata DK 280 Installation Manual page 420

Initialization Program 91-2 -
Data Transfer from Temporary Memory-to
Working Memory
Exits Program Mode
L Enter programming mode.
(Do not press the Intercom
or Directory Number [DN]
Press button 03 and 04,
LEDs 03 and 04 must be lit.
LCD Displays: 9 1 SELECT = 2
PROGRAMMING
TAKING EFFECT
General Notes:
l
This program simulates turning system power OFF (Sseconds) then ON to transfer data
from temporary memory to working memory. This sequence is required on a few
programs which are listed below:
l
When programming with a telephone connected to Port 005; Program 03, Ml-2, 60
and 76 data must be transferred from temporary to working memory.
. When programming with 28OBackup and/or 280Admin Program 03, x4 l-2, tits0 and
76- 1 data must be transferred from temporary to working memory.
l
This program does not change or erase any programmed data including directory
numbers set in Program 04 and MI4 or logical/physical port assignments in Program 01
and 02.
CAUTION !
Running this Program (9 l-2) will drop all calls and render
the system inoperative for up to eight seconds.
DK0082